Professional PRCD-S ADVANCED with earthed adapter cable 3m for construction site use and permanent outdoor use IP44 (mobile personal protection with oil-resistant rubber cable H07RN-F 3G1.5, DGUV 203-006 compliant)

Описание

For use on construction sites and outdoors, the Professional PRCD-S ADVANCED with 3m protective adapter cable offers a reliable and robust solution to protect the user when using electrical appliances on sockets that are not known to be working properly. Thanks to improved testing for protective conductor interruption from approx. 1kΩ, glove detection (device cannot be switched on in the event of a fault even with insulating gloves) and the comprehensive function test by checking the entire signal chain from protective conductor monitoring to the RCD switching function, safety is further increased. The mobile personal protection system is extremely robust thanks to the oil-resistant 3 m rubber cable (H07RN-F 3G1.5), the solid rubber earthing contact plug and the solid rubber earthing contact coupling with cover. The mobile personal protection also impresses with the following features:

• Protection class: IP44
• Rated voltage: 230V
• Rated current: 16A
• Rated power: 3680W
• Rated residual current: IΔn = 30mA
• All-pole (L/N/PE) switching residual current circuit breaker type A
• Undervoltage release
• No automatic restart after voltage recovery
• No switching on if the protective conductor is interrupted or energised
• As soon as voltage occurs on the protective conductor during operation or the protective conductor is interrupted, the protective device switches off
• If external voltage occurs on the protective conductor, e.g. by drilling into a line of another circuit, the protective device does not disconnect the protective conductor
• For use on construction sites in accordance with DGUV 203-006 (formerly BGI 608) and permanent outdoor use
• PRCD in accordance with VDE 0661
• Category 2 equipment (K2 DGUV 203-005): Use for rough operation with high mechanical, physical and chemical impacts

RCD personal protection switch

A residual current circuit breaker (RCD) is an electrical protective device used primarily to protect against electric shocks. The RCD detects the difference between the incoming and outgoing current in a circuit. If a fault current occurs, for example due to an insulation fault or a current flow via an unwanted discharge such as a person, the RCD switches off the circuit. This significantly reduces the risk of electric shock or fire caused by a fault current. When used as personal protection, a residual current device must trip and interrupt the circuit at a residual current of 30mA at the latest.

Special features of the PRCD-S ADVANCED from brennenstuhl®

• Low-resistance (approx. 1kO) protective conductor detection
• Glove detection (device cannot be switched on in the event of a fault, even with an insulating glove)
• Extended test coverage (including protective conductor detection and monitoring)